how to install the filter element of the oil fume purifier

to confirm that the filter element has failed, it can be installed and the fume purifier is operating normally. if you accidentally find that the automation machine is not started wrongly or the command light is not running normally, you can now start your fume purifier and test whether it is running properly. check and automate the commander on the machine panelshanghai people forumlamp. please check again and make sure the filter element is installed correctly.

the wrong filter element can be selected

before installing the filter element of the fume purifier,

the wrong filter element can be selected

prepare tools and products

please make sure you have the tools and products you need. most of the mountable tools are included in your fume purifier before installing the filter element. but you may need a spare filter element. make sure you have it all ready before you can install the filter element to reduce interference.

restart the automation machine and remove the old filter element

and patiently wait for the purification device to completely stop operating normally. then gently lift the old filter element and remove it from the purifier. you need to re-activate your fume purifier to remove the old filter element. please press the "restart" button of your fume purifier.

if the error is wrong, you can install a new filter element

make sure it is inserted directly into place. after directly adding the filter element, you can now also take out the new filter element and place it in the relevant middle position of the purifier. ensure that the filter element mount is exactly in line with the automated machine jack. then and use the gentle inner force of the movement to push the filter into the socket. you can also turn off the purifier all and wait patiently for a few seconds to make sure the filter element is installed in place.

test the automatic machine to operate normally