the fume purifier is rusted

not only does it affect the good purification effect, but it also cleanses the oil smokeshanghai people forumrust problems occur. it will also cause dangers to indoor bad environments and people's health. therefore, when you can choose a fume purifier, you must choose high-quality materials, and pay special attention to maintenance and cleaning during use to avoid sudden rust.

rust problem of oil fume purifier

why does the oil fume purifier rust?

after the oil fume purifier is used for a long time,

rust problem of oil fume purifier

why does the oil fume purifier rust?

why does rust on the oil fume purifier affect the good purification effect?

it will cause resentment on its surface and rust the oil smoke purifier. the protruding part will form fouling at the smoke exhaust port, and the oil fume purifier will leak when it is exhausting. after the air leakage, the smoke and grease will be discharged into the room through the loophole. this will not only cause the oil fume purifier to have good purification effect but also affect the quality of the indoor air, causing danger to people and health.

how to avoid rust from the oil fume purifier?

it is best to choose a corrosion-resistant material to produce it. the most important thing to avoid rust from the oil fume purifier is the choice of the material. such as stainless steel, aluminum alloy, etc. at the same time, during use, special attention should be paid to removing water vapor from the surface of the fume purifier, and the water droplets on the surface of the purifier can be wiped in time. in addition, the oil fume purifier must be regularly repaired and maintained, so that the components that will be corroded and aging can be replaced in a timely manner.

what should i do after the oil fume purifier is rusted?

you must pass the maintenance treatment method as soon as possible. first, thoroughly clean the surface of the fume purifier, if the fume purifier has rusted. small holes formed on the surface of the fume purifier and protruding place can also be wiped off with sandpaper, and then coated with waterproof paint and other protective layers to pass anti-corrosion treatment. if the situation is very serious, it is best to find a professional person who needs maintenance to deal with it to avoid excessive damage to the purifier.

conclusion